THE IMPORTANCE OF FEEDBACK IN SWITCHES AND DIALS
User interfaces have always been a vital aspect of the working experience. The look, feel and method of interface interaction is one way that machine manufacturers separate themselves from competing machine makers. In the industry electromechanical switches play a large role in defining the touch, feel of interface actuation.
As the gateway to a user interface, a switch or dial solution must have a desirable appearance and feel. To achieve this result, we worked closely together with major automotive switch manufacturers to optimize aesthetics, ergonomics and performance. The result is that even with gloves on, you feel the clicks in the rotary dials. This selection dials do give you the feedback when turning. You do even not have to look to know how much you did set the parameters up or down.
|Serie PhotonWeld A-PRO||PhotonWeld A-PRO-T85||PhotonWeld A-PRO-T55||PhotonWeld A-PRO-T40|
|Max Welding Penetration - Single side Welding|
|Fibre cable length||10m||10m||10m|
|Power supply cable||10m||10m||10m|
|Operating temperature||-20 ~ +55°C||-20 ~ +55°C||-20 ~ +55°C|
|Active cooling with compressor|
Intensive Drip and Spray Water Testing following IPX3 protocol
THE RAIN ROOM
Our very own weather machine. This sophisticated testing facility is designed to simulate a wide variety of rain conditions. Using specially engineered rain nozzles strategically positioned in the chamber, we test a Machine waterproof design in conditions that range from light drizzle to wind-driven rain.
The oscillating tube is made of stainless steel equipped with multiple special spray nozzles. The oscillating movement range of the spraying tube is reaching to ±60° in this test.
The drip tray is made of stainless steel, and the drip holes are evenly distributed.
MAKE IT SIMPLE
Step 1: Select your material and thickness on the screen and you are ready to work.
Step 2: Use the 3 rotary buttons to fine-tune your welding and adapt it to the specific situation.
==>Thats all it needs to make a perfect laser Weld
UNBEATABLE EFFICIENCY, IN EVERY LOAD CONDITION
Maximum reliability, wide operating range, continuous capacity modulation, class A efﬁciency. The advantages of the ecolener formula represents the no-compromise solution of the new range. The result is a unit that focuses on efﬁciency in all load conditions, overcoming the limitations traditionally imposed by the other cooling systems
Laser Automatic Wire Feeder - Filler Wire Feeding Machine Digital Controlled is for us a standard
For Wire Type: Stainless Steel, Carbon Steel, Alumimum, Alloy, cupper, etc = We use standard welding wires on standard rolls
The cold wire feeder for Laser Welding by Lasermach offers highest productivity for the laser welding pros.
The lasermach Feed wire feed for Laser welding units ensures superior quality and high speed Laser welding with perfect precision. For this purpose, the automatic wire feed has a fully digital control, a tacho-controlled feed motor, and a 4-roller high-precision feed for precise wire feeding.
The Lasermach cold wire feeder ensures fool-proof feeding and reliable results without spatter in combination with the Laser welding unit when the maximum deposition rate is required in Laser welding. It is ideal for all laser welding tasks in which a filler metal is essential.
4-roller precision wire feed.
The 4-roller precision wire feed with tacho-controlled feed motor ensures precise wire feeding.
Digital speed control.
Ensures precise and reliable cold wire feeding while welding
Direct connection to the power source.
Simply connect the Lasermach Feed to your PhotonWeld A-PRO welding unit using the dedicated cable. This will exchange all relevant information and allow integrated control between your PhotonWeld welding unit and the automatic wire feed.
Beautiful weld, high speed, no traces of welding, no discoloration, no need to polish afterwards;
Getting started with the operation is easy and the demands on the operators are extremely low.
The new laser manual welding head has an international standard two colour warning light, which conforms to EU safety production standards.
Our goal is to optimize the beam delivery from the high power laser to the work piece. Since our customers demand high performance, flexible solutions and no loss of power or time, we continuously work to improve and increase the possibilities of laser welding technology.
The fiber collimator is an important component of laser devices such as isolators and circulators. It is formed by precisely aligned the optical fiber and the focusing lens. It can not only collimate the beam output from the optical fiber but also couple the collimated beam into the optical fiber.
A compact and air-cooled fiber connector design including integrated collimating optics. The QCS is specially designed for diffraction limited medium-power fiber lasers. Built with standard or customized optical fiber. Compared with the conventional collimator, it has higher reliability and can withstand higher power laser.
- Triple protection around the fiber cable
- High protective stainless steel Anti bending unit at cabinet exit avoid cracking of the fiber cable when pulling on the torch cable
- Cable exit from the torch is mounted to the front at the side of th emachine to avoid bending
Remote controller for selecting optimal process conditions
Welding conditions can be set using our standard delivered dedicated application
This application program is dedicated for the operation of the PhotonWeld A-PRO provided by Lasermach. PhotonWeld-Connect is an application program for selecting, adjusting, and saving welding conditions, monitoring status of, and checking interlocks, warnings, and alarms in the PhotonWeld A-PRO Series. This application is delivered with the PhotonWeld PRO machines or can be downloaded from your app store. Can only be used on our new PRO machine.
- Simple preset selection of material and thickness ensures consistent high-quality laser welds and cleaning
- Presets include multiple wobble welding functions to accommodate wider seams and for parts with poor fit-up
- Operators can instantly switch between presets to process multiple material-thickness combinations
- Advanced operators can customize presets, save for future use and can be used by novice operators to produce the same results
- Novice operators require less training which reduces labor costs while preserving quality, increasing productivity and decreasing scrap
Bleutooth control center beside the full screen controll center and a cable control
An ethernet computer connection provides access to advanced parameter settings to fine tune and save process parameters.
Who does not drop once his welding torch?
Who was never using his welding torch not only for welding?
with laserwelding, when dropped on the floor or hit, there is a great possibility that the laserbeam is not anymore in the center line. As the laserbeam is only 0.1 mm of diaameter, or even smaller, the correct position of it is very important for a good weld. Now with our new app the position of the welding beam can be adjusted with a slider on the screen of your phone! Finished with losing time by adjusting manual.