
Laser protection class 4 applies to our Wobble manual laser welding equipment when in operation.
Different measures are therefore required on the customer side to ensure laser safety, such as the appropriate training of employees, wearing special protective equipment and setting up a separate laser safety area.

Rules of conduct on the safe use of lasers
The following rules are of particular importance:
- Never point the laser beam at anyone’s eyes!
- Do not look directly into a laser beam!
- Always wear protection glasses!
- If the laser light accidentally strikes your eyes, close your eyes and immediately move your head out of the laser beam.
- Do not use any focusing optical device to look at the laser beam while working with lasers.
Our Selected Safety eyewear for laser welding
Good Eyes Safety Requires Wearing Protective Eyewear When Using Welding or Cleaning Lasers
Glasses and goggles are clasified by its Optical Density (OD).
That is the base-0 logarithm of the attenuation factor by how much the filter reduces the beam’s power. For example, glasses with OD 2 reduce the laser beam by a factor of 100 (10²), glasses with OD 3 reduce the laser beam by a factor of 1000 (10³), ... Required eyewear must reduce the OD to a power below the maximum permissible exposure.
You must also make certain the lenses and frames of the glasses are physically strong enough to take a direct hit from the laser without breaking. Therefore, you must also take into account their damage threshold. The OD and light wavelengths the glasses protect against are usually pad printed on the frames or in the glass.
Also, laser operators must wear the glasses specifically for that laser’s wavelength. Laser glasses for another machine, with a beam of a different wavelength, are not safe even if their OD is just as high or their laser frequency is different.
Coated protection goggles are not alowed as a small scratch in the coating makes them useless!! The lens material must contain the laser absobtion material thru all the lens-material.
OUR 1064 ~1084 nm SELECTED LASER SAFETY EYEWEAR For LASER WELDING - Soon available 2022 - 02
1064 ~ 1084 nm FIBER LASER SAFETY GLASSES - 1064 ~ 1084 nm YAG LASER SAFETY GOGGLES - Laser Welding Safety Eyewear
Specific eye protection for laser Welding
With red pointer visible!

Protection TYPE ONE Eyewear Filter Material for Laser Welding
GREEN - VLT 50+ - OD7+
- Green Colour
- Recommended for all wobble laser welding laser till MAX 1800 Watt
- Very good visibility
- Red pointer fully visible
- Good protection
- Optical Density for Welding laser Light: OD 7+ CE Filter: 190~450nm OD7+ & 800~1100nm OD7+
- Visible Light Transmittance rate: VLT 50~53% : very clear and good view
- Fully coloured material, no scratchable coating

TYPE TWO Eyewear Filter Material for Laser Welding
BRAUN VLT 35~38% - OD8+
- Braun Colour
- Recommended for bright Splattering welding material plus 2000 Watt and Higer Power
- Very good visibility
- Red pointer fully visible
- Good protection
- Optical Density for Wleding laser Light: OD 8+ CE
- Filter: 190~540nm OD3+ & 800~1100nm OD8+
- Visible Light Transmittance rate: VLT 50~53% : very clear and good view
- Fully coloured material, no scratchable coating