Laser welding nickel and titanium-based aerospace alloys requires control of the weld geometry and weld microstructure, including minimizing porosity and controlling grain size. In many aerospace applications, the fatigue properties of the weld are a critical design criteria. For this reason, designers nearly always specify that the weld surfaces be convex, or slightly crowned, to create a reinforcement of the weld.
To achieve this, a 1.2 mm diameter filler wire is used in the automated process or you use a wobble welding head. Addition of the filler wire to a butt joint leads to a consistent crown on both the top and bottom weld bead. The selection of the alloy of the wire also contributes to the weld’s mechanical properties by ensuring a sound microstructure of the weld.
Nickel alloys are built to survive the harshest environments.
High heat. Corrosive chemicals. Extreme pressure. That’s why they show up in nuclear plants, jet engines, and chemical processing. All the jobs where failure isn’t an option. But welding them is no walk in the park. They’re strong, but they don’t like to be rushed. And if you’re not careful, they’ll crack, warp, or harden in all the wrong ways.
The biggest challenge with nickel alloys is managing heat input. These materials tend to work-harden and form brittle microstructures if they cool too fast or unevenly. On top of that, many nickel alloys are sensitive to contamination. Any sulfur, phosphorous, or oxygen in the weld zone can lead to hot cracking or porosity. That means prep has to be flawless. And your shielding gas better be dialed in tight.
Traditionally, TIG has been the preferred method. You can control the arc and feather in the heat slowly. But it’s time-consuming and still prone to distortion and inconsistent results. That’s where PhotonWeld laser welding shines. You can apply just enough heat, exactly where you need it, and nothing more. The narrow beam profile means less dilution, better control over penetration, and minimal distortion. You don’t overcook the surrounding metal. That’s a huge win when you’re working with precision components like turbine blades or reactor fittings.
With the right setup, our fiber laser PhotonWeld welder can weld Inconel, Hastelloy, and Monel with beautiful results. Clean beads. Low porosity. High strength. And because the heat-affected zone is so small, you avoid many of the metallurgical problems that show up in traditional welding. Post-weld heat treatment is still sometimes necessary, depending on the alloy and application. But overall, laser welding gives you tighter control and fewer surprises.
It’s not plug-and-play. You need to know your beam parameters, shielding strategy, and joint design. But once it’s tuned in, laser welding gives you an edge that’s hard to beat in the world of nickel alloys.