The new Photonweld laser stud welding machines.
Strength that leaves its mark without any mark on the backside
Developed for tough construction site use and continuous operation, the machines deliver first-class welding results thanks to their high duty cycle, constant current control and modern microprocessor control - even in adverse outside temperatures and long cable runs.
High-speed stud welding using the Photonweld handheld laser stud-welding machine.
This is a welding method where metal pins, bolts, studs, or other small parts are quickly and intensely welded onto a metal surface.
Our advanced Laser stud welding machine, is highly suitable for precision and markless stud welding with diameters from 1.0 to 12.0 mm and lengths up to 50 mm.
Laser welding studs
Due to a fast increasing number of enquiries about studs that have to be applied using laser welding, many manufacturer of welding studs started to produce typically laser welding studs. Specific Laser welding studs have been developed in such a way that they are similar in dimension to welding studs for tip ignition. They simply leave off the ignition tip and the slight pitch, so that they can be welded flat on the sheet.
Laser Stud welding
Laser Stud welding, is a form of high efficient and low energy cost welding in which a stud or bolt is permanently connected to the workpiece. The bolt is attached to the workpiece by means of a laser welding gun. This is a welding method where metal pins, bolts, studs, or other small parts are quickly and intensely welded onto a metal surface.
Our advanced Laser stud welding machine, is highly suitable for precision and markless stud welding with diameters from 1.0 to 12.0 mm and lengths up to 50 mm.
With laser stud welding, not only can use be made of bolts, but also small bushings with internal threads. The advantage of the laser stud welding method is the high processing speed, the welder can weld several pieces per minute. There is also almost no heat distortion because the heat is applied very shortly and very locally and the piece cools down quickly. Due to the different methods exisitng, capacitor stud welding and arc stud welding, both types of studwelding can be replaced and thin and thicker material can be welded by laser stud welding.