WLAM (Wire Laser Additive Manufacturing)
The WLAM (DED - Direct Energy Deposition) process allows for the creation of 3D parts using a laser beam to add molten wire.
This WLAM technique produces very good internal quality (no porosity) and improves deposition precision, with a much more stable and consistent bead (0,8~2,2 mm) compared to Arc processes (3 to 8 mm).
Excellent metallurgical quality
Large parts (up to 12 m)
High build speeds depending on the material
Very Low energy consumption compared to normal WAAM (till minus 85% less)
Multi-material manufacturing
Controlled deformation
Use of the “right material”
Diversity of materials due to the availability of welding wire
High metallurgical quality
Wire laser additive manufacturing
Wire Laser Additive Manufacturing (WLAM) is a form of additive manufacturing where a wire feedstock is used as the material source, and a laser provides the heat source for melting the wire to form a part layer by layer.
A laser heats and melts a metal wire, which is fed into the melt pool.
The wire can be fed coaxially with the laser beam or at an angle, and the movement of the laser head or the workpiece platform builds the part layer by layer.
Additive manufacturing with Laser and wire feeder: WLAM
Additive Manufactoring with Wire
Additive manufacturing is a comparably new production method, involving a component being constructed via layer-by-layer material coating. Originally developed for prototyping, today it is mainly used for the production of geometrically complex components in small batch sizes from 1 to 1,000. Here, additive manufacturing is more economical than conventional methods, for the most part.
Advantages of WLAM
Efficiency:
WLAM can have high material efficiency, often exceeding 90%, as there is minimal waste compared to powder-based methods.
Cost-Effectiveness:
Generally, wire is cheaper than metal powders used in other AM processes, and there's no need for expensive powder handling systems.
Large Parts:
Suitable for manufacturing large parts due to the high deposition rates compared to powder bed fusion.
Material Variety:
A wide range of materials can be used, including titanium alloys, stainless steels, aluminum, nickel alloys, etc., as long as they are available in wire form.
Safety:
Less environmental contamination risk since wire doesn't aerosolize like powders can.
Low energy consumption:
Compare to normal welding our technology can consume till 85% LESS energy
Additive manufacturing applications – overview
How does additive manufacturing work?
The main tool involved in metal additive manufacturing is a system which contains a laser, a movable metal deposition head and a metal powder nozzle or wire feeder. The metal deposition head or the wire feeder head, which are suitable for 3D printing, is moved over a building platform while it adds the metal powder or the wire by heating it with the laser beam and melting it on the surface. After the material has been cooled down, the next metal layer can be applied, thereby additively generating a three-dimensional component in accordance with the construction plan. The technical principle of the additive manufacturing process is basically the same as the cladding process. The difference is that it does not revolve around two-dimensional layers: instead, three-dimensional forms are created.