Skip to main content

Laser Welding is complex. Complicated structures require not only the necessary welding technology, a great deal of sensitivity and a deep understanding of the material, but also extensive calculations. Until now, these calculations have been complex and time-consuming and only welding specialists could help you in this.

Our new PhotonWeld laser Welding  App supports the complex laser welding tasks settings and the the planning and optimization of welding tasks such as the adjusting of cooling times, preheating temperatures or the calculation of the required filler metal speed. 

 

The basic idea is that the user connects his mobile device to the control module and then uses the app to control the system. 

LASER WELDING MADE SIMPLE FOR OUR WELDERS !!

Most Easy controllable Laser welding machine, 3 rotary buttons for the 3 most important functions, More is not needed at the workfloor.

Innovative Control Concepts with gives you the feeling of using a standard Welding Machine

The only Synergetic Laser welding controller that works and feels like a normal welding machine

A Welding Machine must be User-friendly and simple to control

 

MAKE IT SIMPLE FOR OUR WELDERS with our FOOLPROOF OPERATION !

 

Step 1: Select your material on the screen 

Step 2: Select your thickness to weld on the screen

Step 3: Select if you are welding with or without wire in-feed

 

Start Laser Welding!

 

==>That's all it needs to make a perfect laser Weld

Adjust and create your own welding Parameters

Super Easy selection of Welding settings

Remote controller for selecting optimal process conditions

Welding conditions can be set using our standard delivered dedicated application

This application program is dedicated for the operation of the PhotonWeld A-PRO provided by Lasermach. PhotonWeld-Connect is an application program for selecting, adjusting, and saving welding conditions, monitoring status of,  and checking interlocks, warnings, and alarms in the PhotonWeld A-PRO Series.  This application is delivered with the PhotonWeld PRO machines or can be downloaded from your app store. Can only be used on our new PRO machine.

PhotonWeld-A-PRO: Factory Presets Ensure Optimized Welds & Cleaning & Cutting

 

  • Simple preset selection of material and thickness ensures consistent high-quality laser welds and cleaning
  • Presets include multiple wobble welding functions to accommodate wider seams and for parts with poor fit-up
  • Operators can instantly switch between presets to process multiple material-thickness combinations
  • Advanced operators can customize presets, save for future use and can be used by novice operators to produce the same results
  • Novice operators require less training which reduces labor costs while preserving quality, increasing productivity and decreasing scrap

Selection of your welding packages by bleu tooth over your phone

Modifying, saving, storing, creating of every possible material with adapted parameters

Bleutooth control center beside the full screen controll center and a cable control 

An ethernet computer connection provides access to advanced parameter settings to fine tune and save process parameters.

     

Ajusting of the center of the laser beam

direct adjusting by bleutooth from mobile phone

Who does not drop once his welding torch? 

Who was never using his welding torch not only for welding?

with laserwelding, when dropped on the floor or hit, there is a great possibility that the laserbeam is not anymore in the center line. As the laserbeam is only 0.1 mm of diaameter, or even smaller, the correct position of it is very important for a good weld. Now with our new app the position of the welding beam can be adjusted with a slider on the screen of your phone! Finished with losing time by adjusting manual.

Automatic repair of the miss-alligned laser beam after any fall or shock

Nothing to screw or unscrew anymore

Bluetooth fast connection