NEW Synergic Control in Laser Welding : constant quality and rapid welding
Very simply, synergic control in a Laser welding machine refers to a machine that automatically sets the welding parameters, according to material to weld.
Human control alone is no longer enough in precision industrial processing where instruments such as welding machines are used. Only highly specialised workers can continue using manual welding machines, but this entails a high cost to companies where many high-skill welders need to be employed in the production line. An unskilled welder could make mistakes and slow down the whole work process, inevitably causing delays in deliveries and a rise in costs.
Today, the issues due to human error in welding are much lower thanks to technologies that make these machines synergic.
A synergic laser welding machine helps the worker not make mistakes, work quickly and with always-high quality standards. Our PhotonWeld A-Pro most advanced digital laser sources for welding does have selectable memories where all the settings are ready to go, depending on the material to be welded, the thickness of the material used, and if there is infeed wire chosen.
With these synergic welding machines, perfect beads can be made, quickly, even with less specialised welders.
Innovative Control Concepts with gives you the feeling of using a standard Welding Machine
The only Synergetic Laser welding controller that works and feels like a normal welding machine
FOOLPROOF OPERATION !
MAKE IT SIMPLE
Step 1: Select your material on the screen
Step 2: Select your thickness to weld on the screen
Step 3: Select if you are welding with or without wire infeed
Start Welding!
==>Thats all it needs to make a perfect laser Weld
Less Trial and Error with the PhotonWeld MASTER Process Library
Select your Material, welding penetration wanted and with or without wire feed on your screen and that's it!
Parameter adjustment is another area where manufacturers do lose time. When material, thickness or joint conditions change, operators may need to test and adjust settings before achieving the desired weld.
The PhotonWeld MASTER process library provides established welding process parameters for common applications, allowing operators to start from a proven process instead of repeatedly experimenting from scratch.
The goal is not to remove operator judgment. It is to eliminate unnecessary trial and error.
And with our exclusive 3 buttons controller, it is possible to fine-tune in fractions of seconds!
No losing time with screensearch and multiple button selections on the screen!
When a suitable process is already available, operators can focus on the workpiece rather than spending excessive time searching for the right starting point.
For many fabricators, one of handheld laser welding’s primary appeals is ease of use. Sales and marketing materials often claim that all you need to do is pick up the torch, select a preset, and weld. And sometimes it is (almost) that easy.
However, relying exclusively on pre-built parameter sets – especially without understanding how they work – is a good way to leave performance and good results on the table.
For critical welds or maximum optimization, it will be most of the time necessary to tweak your machine’s settings to match the workpieces you want to weld. For that we have the 3 rotoary knobs! No more screen touching!
A basic understanding of laser welding variables is the base all you need to start laser welding and the fundamental principles of laser physics remain always the same.
Laser Welding packages to give you a start without delay
Preset Welding Parameter packages + Free programmable Welding Parameter Packages
| Welding Packages | Lite-Pro S40 HS | Lite Pro S50-HS | Master Pro-X60 | Master Pro-X80 | Master Pro-X100 |
|---|---|---|---|---|---|
| Total welding packages | 35 | 35 | 45 | 42 | 54 |
| number of preset welding packages | 15 | 15 | 25 | 22 | 34 |
| Number of Free custome welding packages | 20 | 20 | 20 | 20 | 20 |
Start with What You Get from the machine interface!
Before jumping straight to fine tuning, you should familiarize yourself with your machine’s factory preset parameters.
All our PhotonWeld-Pro laser welding machines include presets designed to address common materials and thicknesses. These are your baseline.
Most of the time, all you need to do is change the power to match the material quality and thickness and choose the appropriate wire.
For advanced users, or applications with particular requirements, it may be necessary to create a custom parameter preset.
But starting with a factory preset makes it easier to make small adjustments to achieve specific results.
All parameters can be created, selected and deleted from the screen ofr from you mobile phone!
LASER WELDING MADE SIMPLE !!
Most Easy controllable Laser welding machine, 3 rotary buttons for the 3 most important functions
