Ultra light and flexible torch
Only 395 gramm included the cable coupling
Revolutionary lightweight welding torch with Maximum performance.
Experience Unmatched Comfort and Safety with the Industry's Lightest Welding Torch
395 grams only !
Lasermach presents the industry's lightest welding torch, weighing only 395 gram. Designed for comfort, it allows for extended use with less fatigue.
The torch features a built-in wobble function, controlled by a laser system, enabling up to 5,0mm weld width for high-quality, smooth weld seams. For increased operational safety, the torch is equipped with a double-secured contact sensor that only allows operation when the trigger is in hand contact and in contact with the workpiece.
Our goal is to optimize the beam delivery from the high power laser to the work piece. Since our customers demand high performance, flexible solutions and no loss of power or time, we continuously work to improve and increase the possibilities of laser welding technology.
Built-in Wobble Welding for Increased Productivity
- Create highly aesthetic seams and weld parts with poor fit up
- Adjustable Wobble frequency for the best results
- Adjustable weld width from 0.1 mm up to 5 mm optimizes results
- Wobble parameters are pre-programmed and can be adjusted on the fly, saved, and recalled immediately
A compact and air-cooled fiber connector design including integrated collimating optics.
THE LIGHTEST AND SMALLEST HANDHELD WELDING TORCH IN THE INDUSTRY
The welding torch design is super compact and very ergonomic, light, high comfortable to hold and easy to operate with even great acces to confined spaces.
- 395 grams
- 270mm x 230 mm total length total height
- Ergonomic Design
- Status Indicator
- Auto centering of Laserbeam after crash
- Robust construction
- Well balanced and high comfortable
- available with a selection of nozzle tips to optimize different joint types.
- Single Trigger Operation
- QCS Fibre Optic Cable triple protected
- 10 meter fiber cable to reach any corner of a big part
- Dual safety light build-in
- Auto wire feededing by continious push, auto wire retracting by short push
The use of collimated QCS interface greatly reduces the size and weight of the welding torch,only 595g. The optical design is perfectly matched with the QCS output head, the transmission efficiency is high, and the heat generation is small. In addition, the torch has a built-in swing function that allows the operator to consistently and safely perform high-quality welds throughout the day with dual safety light buttons.
Fast adjustable and changeable Nozzle
Weld always with the perfect nozzle and the exact focus length
- Adjust the focus length of your welding nozzle in seconds without rotation of the nozzle tube
- Change your nozzle, and only the top of the nozzle tube in a flash
- Never lose time with adjusting of totated nozzle
- Custom made nozzles are easy to make
- different nozzle-ends available for specific use
- changeover from nozzle in less than 20 seconds
New design laser welding gun / laser torch
Light weight, small size, ergonomic design and comfortable grip;
Beautiful weld, high speed, no traces of welding, no discoloration, no need to polish afterwards;
Getting started with the operation is easy and the demands on the operators are extremely low.
The new laser manual welding head has an international standard two colour warning light, which conforms to EU safety production standards.
10 m fiber cable is our standard
optional 5~15m is available instead of 10m
Safety First: Build-in Safety indicator
Safety indicator on torch for activation or stop of the laser beam
PhotonWeld A-PRO: Full CE Safety certified Handheld Laser Welding Machines
Equiped with all CE requested Safety accesoiries connections as standard
- Laser beam Emission indicator + external emission warning indicator control
- Remote interlock connector with Multi safety interlocks:
- Nozzle contact interlock
- Door contact (external) interlock
- Foot pedal (dead’s men pedal) interlock ready (optinal),
- Hardware Key control lock
- Internal (and external - optional) double wired emergency stop
- Failsafe start-stop control
WE HOLD SAFETY OF PEOPLE IN HIGH ESTEEM!
Super fast changing of protection window.
No more messing around with exchanging protective lenses or never having to worry about dirt in the torch again!
Protective Window for laser welding
Our ultra-clean protection windows are made of plasma fused quartz and optimized for laser welding application and are very transparent to the infrared laser light around 1070 ~1080 nanometer wavelength. They also offer good resistance to high auxiliary gas pressures, which protects the collimator lens and focus lens. This protective window is mounted just in front of the focussing lens for laser welding – it protect the laser lens.
With a collimated QCS interface, it greatly reduces the volume, lenght and weight of the welding torch to only 595 gram
The fiber collimator is an important component of laser devices such as isolators and circulators. It is formed by precisely aligned the optical fiber and the focusing lens. It can not only collimate the beam output from the optical fiber but also couple the collimated beam into the optical fiber.
A compact and air-cooled fiber connector design including integrated collimating optics. The QCS is specially designed for diffraction limited medium-power fiber lasers. Built with standard or customized optical fiber. Compared with the conventional collimator, it has higher reliability and can withstand higher power laser.
Fast adjustable and changeable Nozzle
Weld always with the perfect nozzle and the exact focus length
- Adjust the focus length of your welding nozzle in seconds without rotation of the nozzle tube
- Change your nozzle, and only the top of the nozzle tube in a flash
- Never lose time with adjusting of totated nozzle
- Custom made nozzles are easy to make
- different nozzle-ends available for specific use
- changeover from nozzle in less than 20 seconds
Drastic reduction of burned protecction windows and lenses
Double anti-splash grooves design reduces lens contamination with more than 65% and extend lens life by 3 to 5 times!
As a user of handheld laser welder, you frequently face issues with Protective lens burning? This not only increases consumable costs but also leads to multiple downtime, impacting productivity.
Look here how can we address this core challenge to enhance equipment safety, extend lens lifespan, and reduce operational costs.
Double Anti-Splash Groove Design: Engineered to deflect spatter away from the protective lens, reducing contamination by more than 65% and extending lens life by 3X to 5 x times.
Cost Savings: Fewer lens replacements mean up to 60% - 80% lower annual consumable costs.
Enhanced Stability: Combined with advanced cooling system, the torch maintains consistent performance even in high-intensity workflows.
While a single lens seems inexpensive, frequent burning triggers hidden costs:
Contaminated internal optics → skyrocketing repair bills;
Unstable weld quality → higher rework rates;
Downtime losses far exceed consumable expenses!
Production losses
Avoid A broken Fiber Cable
Multiple fiber cable protections
- Triple protection around the glass fiber cable
- High protective stainless steel Anti bending unit at cabinet exit avoid cracking of the fiber cable when pulling on the torch cable
- Fiber Cable exit from the torch on the machine is mounted at the side of the machine to avoid accidental bending when pushing the machine against another object or the wall
Light-weigth laser Welding Torch, but full of high tech
Very ergonomic and light welding torch with a weight of only 597 grams. The perfect solution for high precision works and the best and most comfortable torch for long lasting jobs! Although we included double wobble motors, double protection lenses, full distance control, we still got a lightweight torch to work continious full shifts.
Smart high frequency swing welding head
Our Smart Wobble welding head can be widely used in metal equipment, stainless steel home and other industries complex irregular welding process; Perfect replacement of traditional argon arc welding, electric welding in thin stainless steel plate, iron plate, aluminium plate and other metal materials welding. Clever interior design and good interactive control system expand the tolerance range and weld width of machined parts,solving the spot tiny disadvantage, and the weld formation is better. Lightweight shape, body engineering design method, comfortable grip; One hand easy to control, easy to operate. With multiple security alarms, automatic light lock after moving parts, high security. Beautiful weld, fast speed, no consumables, no welding mark, no discoloration, no need to polish later. Can be configured with a variety of Angle nozzle to meet the welding needs of different products
Super high speed Wobble head technology
2-D dynamic programmable beam motion
The concept of the 2-D dynamic beam motion or lineair wobble head technology. Independent control of the amplitude and frequency of the oscillation is achieved through a high speed servo controller, allowing more flexibility in stabilizing the keyhole melt during the welding process.
Stability of the keyhole melt is a critical factor when laser welding dificult highly reflective materials such as copper and aluminum. This is partly due to the tendency to spatter, and in the case of some aluminum alloys, a high level of porosity due to the viscosity and surface tension of the melt when using more traditional laser welding techniques. Recent studies have shown the reduction or elimination of these problems with the beam wobble technique, including a recent systematic study with and without fller wire on automotive aluminum alloys.
Overall, the wobble head technique allows for better temperature management of the part. Because the beam passes near any given point of the weld multiple times, the ramp in temperature and cooling rates is slower than in traditional laser welding, which helps eliminate defects and manage spatter.
In addition, this welding technique is compatible with typical welding accessories such as assist gas ports and coaxial nozzles that enable plume suppression and can help control spatter; techniques that are not readily compatible with the scan heads used in remote welding.
In addtion to stabilizing the keyhole melt and reducing porosity in the subsequent weld, the beam wobble technique has proven valuable for alleviating the part-fit requirements for laser welding. Using one of the programable shapes (infnity in this case) and optimizing the amplitide and frequency of the oscillation, an increase in the acceptable seam gap of three times that achieved in conventional laser welding has been demonstrated.
PhotonWeld Laser welding head/PhotonWeld Laser welding torch
- 10-in-1 multi-functional laser head with welding, remote cleaning and seam cleaning functions
- Intuitive status display with indicator lights to keep track of the machine’s status
- Larger trigger button, flexible control even with welding gloves
- Individual air-cooled design channel, eight hours (with test records) of stable continuous operation without heating
PhotonWeld Series = 10 in 1 = Multifunctional Tool
PhotonWeld A-Series:the Swiss army knife for the metal Worker!
1 - Laser Welding without material infeed
2 - Laser Welding with material infeed
3 - Laser Welding of dissimilar metals
4 - Laser Spot Welding
5 - Laser Fish Scale Welding
6 - Laser Stitch Welding
7 - Laser Cutting
8 - Laser Cleaning
9 - Laser Deburring
10 - Edge Rounding